| (1) |
Must withstand bending. |
| (2) |
Must withstand the lateral pressure developed at the pulley section and supporting roller. |
|
|
| (1) |
Bending radius: 7D or greater |
| (2) |
Distance between supporting rollers
(Reduce the distance to reduce the lateral pressure.) |
| (3) |
Maintain suitable sagging
(The greater the sagging, the smaller the lateral pressure becomes.) |
| (4) |
When using two or more cables, make sure the cable diameters do not differ greatly from one another. |
| (5) |
With the white line as a marking, install cables without any twists. |
|
